TOP SECRET PAINT & COATINGS
Performance Data Sheet
TS–646 Triple-Strength Paint Stripper

 

PRODUCT TYPE: Methylene Chloride Solvent Blend Paint Remover.

COLOR(S): Clear, Thixotropic Liquid.

DESCRIPTION: A fast acting paint stripper which contains no caustic, acid, or flammable solvent. This product readily removes paint, varnish, lacquer, baked enamel and shellac safely from most surfaces. It can be used on metal, wood and glass.

Intended Use: For removing paint, varnish, lacquer, baked enamel, or shellac from metal, wood, or glass.
 

PHYSICAL CHARACTERISTICS

VISCOSITY: Semi-Paste.

DRY TO TOUCH: N/A

WEIGHT SOLIDS: N/A

TACK FREE: N/A

VOLUME SOLIDS: N/A

WEIGHT PER GALLON: 9.90 lbs. per gal.

V.O.C.: 1175 grams per liter

COLOR RANGE: Clear

FLASH POINT: N/A

PACKAGING: 1 gallon containers

PRACTICAL COVERAGE: N/A

** Recoat only after the stripped surface is dry and has been thoroughly cleaned.

APPLICATION: Apply a heavy coat over surface with an inexpensive or used brush which may be discarded after use. Allow to set for 10 to 30 minutes or until the surface is broken, then scrape off with a spatula or steel wool. All surfaces to be refinished after the stripping process is completed, should be thoroughly cleaned after the paint stripper has been used. A sweeping wash with water and denatured alcohol will normally assure that the substrate is clean enough to be painted. Some painted surfaces may require more than one application of the stripper to remove stubborn areas.

THINNING: DO NOT REDUCE.

CLEAN-UP: Clean up tools and adjacent areas with warm, soapy water.


 

.