Aquapoxy TS-905 Polyamine Epoxy

	1 Gallon Kit  $180.95 Our Price     $144.76     4 Gallon Kit  $704.95 Our Price     $563.96

Aquapoxy (TS-905) is an water-based catalyst-cured polyamine epoxy floor coating that utilizes the latest in modern coatings technology to achieve a remarkably durable finish. The low odor zero VOC formula is easy to use and produces impressive long lasting results quickly, easily and economically.   

This new generation epoxy floor coating features specially formulated components that produce excellent build, hardness, chemical resistance, durability color and gloss retention not commonly associated with water-based floor coating systems. It self-levels to an ultra smooth high gloss finish. It can be used with or without aggregates, or use it with Super-Fleck chips to create a unique decorative non-skid floor. It is self-priming saving work, time and money.

While Aquapoxy is acceptable for use on concrete floors in manufacturing, commercial and industrial areas it should be at the top of your list for use in commercial kitchens, retail spaces, garage floors and basements where a highly durable finish is required. Overall durability and chemical resistance is remarkable! It holds up to motorized traffic, harsh chemicals, spilled fuel, oil and grease. It will not lift to hot tires and withstands standing water. An excellent choice for use as a garage floor coating, patios, steps and porches.

Guaranteed for 20 years when properly applied. Best results will be obtained when two coats are applied by roller-coat. Aquapoxy may be brushed, rolled or sprayed. Sanding, grinding or blasting is always beneficial but not required due to it's superior adhesion - which save you work, time and money! We recommend using TS-695 Etching Cleaner or the equivalent in all applications. Approved for food service applications. Acceptable for interior and exterior applications. Thins and washes up easily with water. Dry to the touch in three hours. Acceptable for motorized traffic in only 48 hours. Available one gallon or four gallon kits. Sheen is glossy. Practical coverage is approximately 250 square feet per gallon, depending on temperature, texture and thickness.

Aquapoxy is self priming on concrete and porous tile. Best when two or more coats are applied by roller coat. Use Aquapoxy Primer (TS-910) to increase film build increasing longevity. Sanding grinding or blasting is always beneficial but not required on sound uncontaminated surfaces. Available one gallon or four gallon kits. Practical coverage is 250 square feet per gallon. Applied as either a solid color or include Super-Fleck Chips to create a slip resistant finish. May be sprayed or rolled. Dry enough for light foot traffic in 6 hours or vehicle traffic in 48 hours. Your cost is as low as $1.20 per square foot. Guaranteed for 10 years in industrial applications. Click on Application Instructions  to see application instructions. Use the information provided below to calculate your materials needs or use our Get A Quote link or call us at 360-651-9050 8AM-5PM Pacific Time for help figuring your materials list.

Complete Floor Kits; Kits take the stress out of gathering the right components. Available in three sizes.

Recommended Cleaner: TS-695 Etching Cleaner. Its use eliminates the need for grinding, blasting or sanding in most applications.       

Note: Recommend TS-104 Seal-It! in addition to TS-695 for areas where moisture, mold, mildew, water intrusion and hydrostatic pressure are present. 

Recommended primers: Self-priming on well prepared concrete, masonry and porous tile. Use TS-910 Aquapoxy Primer to achieve higher build when desired.

Application Instructions   -  MSDS "A" Component  -  MSDS "B" Component - Performance Data Sheet