Floor Paint and Coatings
Home |  MSDS  |  Product Data Sheets |  Application Instructions |  Best Sellers |  New Arrivals |  Specials |  View Basket |  Checkout |  My Account

Best Sellers

TS-222 Floor-Grip-Gallon
TS-222 Floor-Grip-Gallon


 Key Features Recommendations Description
Floor-Grip is a one-step non slip floor coating that features three different sizes of aggregate added to a durable industrial-marine alkyd base. The finish produced is considerably, thicker, harder and more durable than typical non-slip floor paint. Used by major hotel chains in drive through areas and as a pool deck paint. Improves safety, lowers liability and produces an attractive finish tough enough to meet the demands of heavy traffic while being easy to walk on in bare feet. Will not pick up to hot tires. Grinding or blasting not typically required with the use of TS-695 Etching Cleaner or Muriatic acid. Covers up up to 100 square feet per gallon.

TS-66 Supreme Urethane-Gallon
TS-66 Supreme Urethane-Gallon


 Key Features Recommendations Description
Supreme Urethane is our most durable product. A government spec two-component aliphatic polyurethane finish coating that performs according to specification number MIL-P-85285, so you know you are getting the best. This recent reformulation of TS-2 Hard-Shell Urethane offers lower VOC, twice the solid content resulting in higher build and increased long-term durability. Offers unequaled performance in a wide variety of categories including adhesion, hardness, chemical resistance, resistance to high heat, color and gloss retention. Intended for use where heavy traffic, strong chemicals, high heat, spilled fuel, acids, alkalis, solvents, saltwater, high impacts and corrosion are present. Will not pick up to hot tires. Grinding or blasting not typically required with the use of TS-695 Etching Cleaner or Muriatic acid. Covers up to 300 square feet per gallon.

TS-333 Floor-Grip II-Gallon
TS-333 Floor-Grip II-Gallon


 Key Features Recommendations Description
Floor-Grip II is a one-step non slip floor coating that features three different sizes of aggregate added to a durable water-based modified industrial alkyd base. It is low VOC and low odor. The finish produced is considerably, thicker, harder and more durable than typical non-slip floor paint. Used by major hotel chains as a pool deck paint. Improves safety, lowers liability and produces an attractive finish tough enough to meet the demands of heavy traffic while being easy to walk on in bare feet. Grinding or blasting not typically required with the use of TS-695 Etching Cleaner or Muriatic acid. Covers up to 100 square feet per gallon.

TS-920 Aquapoxy II -Gallon
TS-920 Aquapoxy II -Gallon


 Key Features Recommendations Description
Aquapoxy II is our most technically advanced product. Unique because it includes A resin and B catalyst combined in one container, effectively making it a two-component product in one can. Once applied the molecules cross-link greatly increasing hardness and durability. Utilizes nano-technology producing superior adhesion (micro-ground particles penetrate concrete producing a permanent bond) providing results not commonly associated with water based epoxy finishes. It is low VOC, nontoxic and environmentally friendly. Acceptable for use where there is motorized traffic, chemicals, salt, high impacts and abrasions. It will not lift to hot tires. The finish is breathable making it surface tolerant and easy to apply. Grinding or blasting not typically required with the use of TS-695 Etching Cleaner or muriatic acid. Self priming, may be applied direct to concrete or over any existing coating. 1-COAT COVERAGE: use a ¾ roller cover @ 200 sq ft per gal. 2-COAT COVERAGE: use a 3/8” roller cover @ 300 sq ft per gal. Color is satin, clear is gloss. Apply one coat of color/one coat of clear for a gloss finish.

TS-200 Mono-Epoxy-Gallon
TS-200 Mono-Epoxy-Gallon


 Key Features Recommendations Description
Mono-Epoxy rewrites the book on epoxy itself. A new generation alkyd epoxy-ester resin blend that eliminates the need for mixing multiple components making it easier to use. It can be used in hot and cold climates (-40F – 350F). Has a 10 year guaranty in swimming pools (see it at www.ligeguardpaint.com), which is a testimony to its durability. Its exceptionally high level of performance and ease of application combine to make it a compelling choice. Self-priming on porous materials, use recommended primer on non-porous materials. Grinding or blasting not typically required with the use of TS-695 Etching Cleaner or Muriatic acid. Covers up to 300 square feet per gallon. A minium of two coats is required.

TS-4 Urethane Reinforced Alkyd-1 Gallon
TS-4 Urethane Reinforced Alkyd-1 Gallon


 Key Features Recommendations Description
The addition of urethane to our durable industrial alkyd base improves the long term performance of Urethane Reinforced Alkyd. TS-4 is a value, it is economical, versatile and easy to use where standing water, grease, oil or high heat is present. Withstands intense UV in exterior applications. Offers a high level of adhesion with good flexibility, hardness and chemical resistance. Provides good color and gloss retention. Two coats are required. Grinding or blasting not typically required on concrete with the use of TS-695 Etching Cleaner or Muriatic acid. Covers up to 300 square feet per gallon.

TS-905 Aquapoxy Epoxy-Gallon
TS-905 Aquapoxy Epoxy-Gallon


 Key Features Recommendations Description
Aquapoxy is a new generation catalyst-cured epoxy floor finish that produces excellent results without harming you or the environment. And it’s tough! Recently chosen by 7-11 Stores (world’s largest retail chain) for use in all new construction. Utilizes breathable resin technology to produce an exceptionally hard, durable, surface tolerant finish. Adhesion, chemical resistance, hardness and long term durability are all impressive! This unique combination of environmental and performance properties make it a favorite with architects and property managers. Acceptable for use where heavy traffic, corrosive chemicals, impacts and abrasions are present. Grinding or blasting not typically required with the use of TS-695 Etching Cleaner or Muriatic acid. Covers 200-250 square feet per gallon. Apply one or two coats as desired. Two coats recommended in H-D and commercial applications.

TS-190 Decade Deck Paint -Gallon
TS-190 Decade Deck Paint -Gallon


 Key Features Recommendations Description
Decade Deck Paint's unique combination of advanced resin technology and exceptionally high quality raw materials assures you of satisfaction for years! It creates an extraordinarily tenacious bond flexible enough to expand and contract with wood subject to extremes in weather, intense UV, and pool chemicals. Perfect for extreme climates because it does not become brittle in cold weather or soften in high heat. Out performs traditional old-school deck paints in every significant performance category. It is eco-friendly, low odor and produces a nontoxic finish. One gallon covers 150-200 square feet. Minimum of two coats required. All applications will require sanding. See Product Data Sheet for further details. Available in gallon and five gallon, satin finish.

TS-670 EMCU Moisture Cure Urethane Sealer
TS-670 EMCU Moisture Cure Urethane Sealer


 Key Features Recommendations Description
TS-670 EMCU Moisture Cure Urethane Sealer is used for filling, repairing and sealing cracks, seams, voids and expansion joints in floor, wall, roof and similar structures typically in preparation for the application of a paint or coating product. A superior grade elastomeric polyurethane sealant that utilizes moisture present in air to achieve the cure eliminating the need for mixing resin with catalyst. This high performance sealant is easy to use, versatile and highly durable. The high solid content resin (96% solid) will not sag when applied to vertical and overhead surfaces and has a low shrink ratio. It will bond to most any substrate including concrete, tile, masonry, plaster, aluminum, steel, vinyl and wood. It is acceptable in constant water immersion duty when over-coated with ptotective waterproof paint. The tube fits easily in any standard thrust type calking gun. It is low odor and low VOC. Used on floors, driveways, walkways, ramps, bridges, masonry, walls, pools, roofs and similar structures. Recommended for expansion joints, panel walls, precast units, aluminum and wood window frames, roofing, facia, parapets, vinyl siding, water-wells, and manholes, spillways, storm drains, and other uses. The product is supplied in individual tubes for use with typical caulking guns with a suitable thrust ratio. It is available in single tubes or cases of 24 pieces per package (300ml per cartridge is 10.1 fl oz). Color is Limestone (light gray). Complies to ASTM C920 Type S, Federal specification TT-S-00230C Type II, Corp of Engineers CRD-C-541, Type II, Class A.

TS-66 Supreme Urethane Clear-Gallon
TS-66 Supreme Urethane Clear-Gallon


 Key Features Recommendations Description
Supreme Urethane Clear is a government spec two-component polyurethane finish coating that performs according to specification number MIL-P-85285, so you know you are getting the best. This recent reformulation of TS-2 Hard-Shell Urethane offers lower VOC, twice the solid content resulting in higher build and increased long-term durability. One coat of TS-66 equals two coats of TS-2. Offers unequalled performance in a wide variety of categories including adhesion, hardness, chemical resistance, resistance to high heat, color and gloss retention. Intended for use where heavy traffic, strong chemicals, high heat, spilled fuel, acids, alkalis, solvents, saltwater, high impacts and corrosion are present. Will not pick up to hot tires. Grinding or blasting not typically required with the use of TS-695 Etching Cleaner or Muriatic acid. Covers up to 300 square feet per gallon. Apply one or two coats as needed.

TS-188 Urethane Clear Wood & Floor Hardener-Gallon
TS-188 Urethane Clear Wood & Floor Hardener-Gallon


 Key Features Recommendations Description
Urethane Wood & Floor Hardener protects and hardens your floor and precious woods at the same time. It is a high quality aromatic urethane that utilizes superior quality resins and UV blockers to produce a highly durable finish. The no-mix formula eliminates the hassle of mixing hardeners and cross linkers, and worry of limited pot life. It produces a mirror-like finish with outstanding clarity and depth. It adds elegance and beauty to any wood surface you want to harden or to protect from UV, heavy traffic, impacts and abrasions. Acceptable for use on wood floors, doors, trim, paneling, cabinets and furniture. Covers 300 square feet per gallon. Apply two or more coats for best results. See product data sheet for additional information.

TS-200 Mono-Epoxy-5 Gallon
TS-200 Mono-Epoxy-5 Gallon


 Key Features Recommendations Description
Mono-Epoxy rewrites the book on epoxy itself. A new generation alkyd epoxy-ester resin blend that eliminates the need for mixing multiple components making it easier to use. It can be used in hot and cold climates (-40F – 350F). Has a 10 year guaranty in swimming pools (see it at www.ligeguardpaint.com), which is a testimony to its durability. Its exceptionally high level of performance and ease of application combine to make it a compelling choice. Self-priming on porous materials, use recommended primer on non-porous materials. Grinding or blasting not typically required with the use of TS-695 Etching Cleaner or Muriatic acid. Covers up to 300 square feet per gallon. A minium of two coats is required.

TS-695 Etching Cleaner Concentrate-Gallon
TS-695 Etching Cleaner Concentrate-Gallon


 Key Features Recommendations Description
Etching Cleaner Concentrate is a cleaner-etcher solution used as a preparation treatment on concrete, tile and masonry. Widely used on floors prior to the application of concrete floor coatings and sealers. Removes unwanted contaminants and neutralizes lime and lime by-products on the surface which may seriously impair the coatings’ ability to form a good bond. It is easier, safer and more effective to use than muriatic acid. Removes lime, rust stains, grease, oil and contaminates. Corrects the pH on concrete and other surfaces promoting adhesion. Concentrate saves money on shipping costs. Mixed pint cleans 50-75 sq. ft., mixed quart cleans 200 square feet, mixed gallon cleans 800 square feet.

LG-695 Etching Cleaner Concentrate-Quart
LG-695 Etching Cleaner Concentrate-Quart


 Key Features Recommendations Description
Etching Cleaner Concentrate is a cleaner-etcher solution used as a preparation treatment on concrete, tile and masonry. Widely used on pool and deck surfaces prior to the application of paint and sealer products. Removes unwanted contaminants and neutralizes lime and lime by-products on the surface which may seriously impair the coatings’ ability to form a good bond. It is easier to use and more effective than muriatic acid. Removes lime, rust stains, grease, oil, calcium and contaminates from bare as well as painted surfaces. Corrects the pH on concrete and other surfaces promoting adhesion. Concentrate saves money on shipping costs. Mixed pint cleans 50-75 sq. ft., mixed quart cleans 200 square feet, mixed gallon cleans 800 square feet.

ProductCart

Superfloor Coatings - 1999 Elizabeth Street, North Brunswick, NJ 08902, US

Chat service by BoldChat