Floor Paint and Coatings
Home |  MSDS  |  Product Data Sheets |  Application Instructions |  Best Sellers |  New Arrivals |  Specials |  View Basket |  Checkout |  My Account
Chat service by BoldChat

Garage and Basement Floor Coatings - Category: Non-Slip Additives

Non-Slip Additives
Sort by:
Floor
Coatings
Clear
Finishes
Non-Slip
Coatings
Primers Concrete Floor
Sealers
Cleaners Calks &
Sealants
Non-Slip
Additives
Thinners Paint Cleaner Accelerator / Hardener Super-Fleck
Chips
VaporGuage Kit          
TS-630 Pro-Tex (Non-slip Additive)-8 oz
TS-630 Pro-Tex  (Non-slip Additive)-8 oz

8 oz Bag
List: $18.95
Our Price: $14.36

40 oz Bag
List: $79.95
Our Price: $38.36

 Key Features Recommendations Description
  • Adds a slip resistant texture to paint and coating products.
  • Weightless in paint so it stays suspended better than heavier aggregate additives resulting in a more even finish.
  • Adds a decorative appearance where desired.
INTENDED USE: A non-slip additive for floor paint and coating products that poduces a slip resistant surface.

SURFACES: Decks, floors, steps, patios, walkways, laundry rooms, kitchens, basements, pool decks, handrails, bathrooms.

APPLICATION INSTRUCTIONS: Pour contents of package into container of paint or coating and stir it in thoroughly. NOTE: may lower the viscosity which may make thinning necessary.
Pro-Tex is a micronized wax additive for liquid coatings that creates a textured slip resistant finish to any paint or clear coating product. Use it to improve slip resistance or simply to add decorative texture to any finish. Acceptable for use with both oil and water based products. It is acceptable for brush and roller-coat applications and it is sprayable. Color is white. DIRECTIONS: pour contents of package into liquid coating product, mix thoroughly, apply evenly. No induction time is required. Recommend using one 8 ounce package per gallon.

TS-631 Shell-Tex (Non-slip Additive)-8oz
TS-631 Shell-Tex (Non-slip Additive)-8oz

8 oz Bag
List: $18.95
Our Price: $15.16

40 oz Bag
List: $79.95
Our Price: $63.96

 Key Features Recommendations Description
  • Adds a slip resistant texture to paint and coating products.
  • Stays suspended better than silica aggregates resulting in a more even finish.
  • Adds a decorative appearance where desired.
INTENDED USE: An additive for urethane and epoxy floor coatings that adds texture and slip resistance.

SURFACES: Decks, floors, steps, patios, walkways, laundry rooms, kitchens, basements, pool decks, handrails, bathrooms.

APPLICATION INSTRUCTIONS: Pour contents of package into container of paint or coating and stir it in thoroughly. NOTE: May lower the viscosity which may make thinning necessary.
Shell-Tex is a finely ground walnut shell additive for liquid coatings that creates a textured slip resistant finish to any paint or clear coating product. Use it to improve slip resistance or simply to add decorative texture to any finish. Acceptable for use with both oil and water based products. It is acceptable for brush and roller-coat applications and it is sprayable. DIRECTIONS: Pour contents of package into liquid coating product, mix thoroughly, apply evenly. No induction time is required. Color is walnut shell. Recommend using one 8 ounce package per gallon.

TS-632 Aluma-Tex (Non-slip Additive)-8oz
TS-632 Aluma-Tex  (Non-slip Additive)-8oz

8 oz Bag
List: $18.95
Our Price: $15.16

40 oz Bag
List: $79.95
Our Price: $63.96

 Key Features Recommendations Description
  • Adds a slip resistant texture to paint and coating products.
  • Our most aggressive non-slip additive.
  • Will not cause stains or rust.
  • Adds a decorative appearance where desired.
INTENDED USE:
Commercial or consumer interior / exterior. Use to add texture to any coating product.

SURFACES:
Previously painted or bare surfaces, concrete, fiberglass, tile, drywall, plaster, wood, laminated materials, masonry, brick, composite materials and synthetics.

USES:
Decks, floors, steps, patios, walkways, laundry rooms, kitchens, basements, pool decks, handrails, bathrooms.
Aluma-Tex is a uniformly sized aluminum-oxide additive for liquid coatings that creates a textured slip resistant finish to any paint or clear coating product. Use it to improve slip resistance or simply to add decorative texture to any finish. Acceptable for use with both oil and water based products. It is acceptable for brush and roller-coat applications. Not a sprayable product. Color is dark brown. DIRECTIONS: Pour contents of package into liquid coating product, mix thoroughly, apply evenly. No induction time is required. Recommend using 16 ounces per gallon.

ProductCart

Superfloor Coatings - 1999 Elizabeth Street, North Brunswick, NJ 08902, US