Floor Paint and Coatings
Home |  MSDS  |  Product Data Sheets |  Application Instructions |  Best Sellers |  New Arrivals |  Specials |  View Basket |  Checkout |  My Account

Hardwood Floor Finishes and Coatings - Category: Clear Finishes

Clear Finishes
Sort by:
Color
Coatings
Clear
Finishes
Non-Slip
Coatings
Primers Calks &
Sealants
Non-Slip
Additives
Thinners Paint
Stripper
Accelerator
/Hardener
Super-Fleck
Chips
                                   
TS-66 Supreme Urethane Clear-Gallon
TS-66 Supreme Urethane Clear-Gallon

Half Gallon A&B
List: 115.95
Our Price: $92.76

Gallon A&B
List: $215.95
Our Price: $172.76

 Key Features Recommendations Description
  • A super-duty floor coating suitable for commercial-industrial or residential use.
  • Features lower VOC and higher solid content for increased build.
  • Provides unequaled resistance to corrosive chemicals, spilled fuel, and battery acid.
  • Waterproof long term.
  • Excellent hardness.
  • Outstanding UV resistance.
  • Colorfast gloss retentive.
  • Withstands heat to 500F.
  • Self levels.
  • 4-6 hour pot life once mixed.
  • 20 year guaranty.
INTENDED USE: A super-duty finish coating for floors. Interior / exterior.

SURFACES: Concrete, tile, masonry, plaster, wood, fiberglass, synthetic materials and all metals.

USES: Commercial use, hangars, bathrooms, commercial kitchens, parking garages, drive through areas, showers, concrete sealer and garage floor paint.

THINNER: TS-605 Thinner.

APPLICATION: Brush, roll or spray.
TS-66 Concrete Floor Application Instructions
Supreme Urethane Clear is a government spec two-component polyurethane finish coating that performs according to specification number MIL-P-85285, so you know you are getting the best. This recent reformulation of TS-2 Hard-Shell Urethane offers lower VOC, twice the solid content resulting in higher build and increased long-term durability. One coat of TS-66 equals two coats of TS-2. Offers unequalled performance in a wide variety of categories including adhesion, hardness, chemical resistance, resistance to high heat, color and gloss retention. Intended for use where heavy traffic, strong chemicals, high heat, spilled fuel, acids, alkalis, solvents, saltwater, high impacts and corrosion are present. Will not pick up to hot tires. Grinding or blasting not typically required with the use of TS-695 Etching Cleaner or Muriatic acid. Covers up to 300 square feet per gallon. Apply one or two coats as needed.

TS-100 Silicone Epoxy Clear-Gallon
TS-100 Silicone Epoxy Clear-Gallon

Quart
List: $49.95
Our Price: $39.96

Half-Gallon
List: $74.95
Our Price: $59.96

Gallon
List: $136.95
Our Price: $109.56

5 Gallon
List: $674.95
Our Price: $539.96

 Key Features Recommendations Description
  • Easy to use no-mix formula.
  • Low VOC low odor product.
  • Produces a hard yet flexible finish.
  • Good chemical resistance.
  • Waterproof finish.
  • Excellent hardness.
  • High adhesion.
  • Provides unequaled, UV resistance, clarity and gloss retention.
  • Withstands heat to 400F.
  • Resists cracking, peeling and chipping.
  • Self-leveling finish.
  • 20 year guaranty.
INTENDED USE: Commercial and residential interior / exterior.

SURFACES: Concrete, tile, masonry, plaster, wood, fiberglass, synthetic materials and all metals.

USES: Floors, bathrooms, laundry rooms, basements, showers, commercial kitchens, epoxy garage floors and most concrete floor paint applications.

THINNER: TS-101 Thinner.

PRIMER: Self-priming in two or more coats on most surfaces.

APPLICATION: Brush, roll or spray.
TS-100 Concrete Floor Application Instructions
Silicone Epoxy Clear is a unique resin blend that produces extraordinary results in a wide variety of applications. Silicone combined with epoxy produces a finish that is both hard and flexible at the same time. Offers unequalled performance where grease, oil, grime and water is regularly present. Offers a high level of adhesion with good flexibility, hardness, chemical resistance and resistance to high heat. Offers outstanding gloss retention. Intended for use where heavy traffic, high heat, acids, alkalis, solvents, saltwater, high impacts and corrosion are present. Grinding or blasting not typically required on concrete with the use of TS-695 Etching Cleaner or Muriatic acid. Covers up to 400 square feet per gallon. Apply two or more coats for best results.

TS-188 Urethane Clear Wood & Floor Hardener-Gallon
TS-188 Urethane Clear Wood & Floor Hardener-Gallon

Gallon
List: $76.95
Our Price: $61.56

5 Gallon
List: $374.95
Our Price: $299.96

 Key Features Recommendations Description
  • Suitable for professional sports venues, commercial and residential use.
  • Provides a highly durable protective finish.
  • Hardens wood making it more durable long term.
  • Produces a beautiful honey colored finish that adds beauty to wood.
  • No-mix formula.
  • Provides excellent hardness.
  • Dries fast.
  • Easy to apply.
INTENDED USE:
Commercial and residential interior.

SURFACES:
Wooden surfaces including most all wood species. Also acceptable for use on furniture, paneling and cabinets.

USES:
Sports floors, commercial floors, Restaurants, commercial kitchens, retail spaces and entry ways. Not for use where there is motorized traffic or where there is standing water.

THINNER:
TS-101 Thinner.

APPLICATION:
Apply by pad applicator, brush or spray.
Urethane Wood & Floor Hardener protects and hardens your floor and precious woods at the same time. It is a high quality aromatic urethane that utilizes superior quality resins and UV blockers to produce a highly durable finish. The no-mix formula eliminates the hassle of mixing hardeners and cross linkers, and worry of limited pot life. It produces a mirror-like finish with outstanding clarity and depth. It adds elegance and beauty to any wood surface you want to harden or to protect from UV, heavy traffic, impacts and abrasions. Acceptable for use on wood floors, doors, trim, paneling, cabinets and furniture. Covers 300 square feet per gallon. Apply two or more coats for best results. See product data sheet for additional information.

TS-200 Mono-Epoxy Clear-Gallon
TS-200 Mono-Epoxy Clear-Gallon

Gallon
List: $136.95
Our Price: $109.56

5 Gallon
List: $674.95
Our Price: $539.96

 Key Features Recommendations Description
  • Easy to use no mix formula.
  • Commercial industrial quality product.
  • Will not lift to hot tires.
  • Water resistant finish.
  • Excellent chemical resistance.
  • Self-priming on most surfaces.
  • Resists fading and weathering.
  • Resists cracking, peeling and chipping.
  • Self leveling finish.
  • Nontoxic when dry.
  • 20 year guaranty.
INTENDED USE: Commercial, industrial, manufacturing and residential interior / exterior. Epoxy floor paint.

SURFACES: Concrete, tile, masonry, fiberglass and metal.

USES: Commercial use, garage floors, basements, retail spaces, kitchens, laundry rooms, patios, porches, docks, ramps, walkways. Meets most concrete floor coatings requirements.

THINNER: TS-101 Leveling Thinner.

APPLICATION: Brush, roll or spray.

TS-200 Application Instructions
Mono-Epoxy Clear rewrites the book on epoxy itself. A new generation epoxy-ester floor finish that eliminates the need for mixing multiple components together. It utilizes oxygen curing rather than two-component catalyst-curing making it easier to use. Acrylic has been added to improve long term durability and clarity. It can be used in hot and cold climates (-40F 350F). Its exceptionally high level of performance and ease of application combine to make it a compelling choice. Self-priming on porous materials, scuff and etch glazed surfaces. Grinding or blasting not typically required on concrete with the use of TS-695 Etching Cleaner or Muriatic acid. Covers up to 300 square feet per gallon. Two coats required.

TS-6990 Aquathane Clear-Gallon
TS-6990 Aquathane Clear-Gallon

Gallon
List: $159.95
Our Price: $127.96

5 Gallon
List: $779.95
Our Price: $623.96

 Key Features Recommendations Description
  • Suitable for professional sports venues, commercial and residential use.
  • Provides a highly durable protective finish.
  • Acceptable for interior or exterior use.
  • No unwanted amber resin color.
  • No-mix formula.
  • Low odor, Low VOC Product.
  • Excellent hardness.
  • Dries fast.
  • Easy to apply.
  • Low odor product.
  • VOC compliant.
INTENDED USE: A finish coating for commercial areas, sports venues, residential interior / exterior.

SURFACES: All wooden surfaces including most all wood species.

USES: Sports floors, commercial floors, restaurants, commercial kitchens, retail spaces, bathrooms and entry ways. Excellent for use in residential applications.

THINNER: Water.

APPLICATION: Apply by pad applicator or spray.
Aquathane Clear Finish is a high-quality modified aromatic polyurethane which is highly durable, impact and stain resistant. It is low VOC and low in odor. The solids content in this system is higher than conventional nitrocellulose lacquers and oil-based stains, making film build, durability and aesthetic appearance superior to conventional water based finishing systems. Designed as a highly abrasion resistant clear wood finish for hardwood floors, it is also well liked for use on furniture, cabinets, countertops and wood trim. Unique because it produces an exceptionally hard weather resistant finish without the hassle of mixing multiple components together. Durable enough for professional sports venues. Superior UV inhibitors prevent bleaching and UV damage to wood fibers. Covers up to 300 square feet per gallon. Apply two or more coats for best results. See product data sheet for additional information.

ProductCart

Superfloor Coatings - 1999 Elizabeth Street, North Brunswick, NJ 08902, US

Chat service by BoldChat