Floor Paint and Coatings
Home |  MSDS  |  Product Data Sheets |  Application Instructions |  Best Sellers |  New Arrivals |  Specials |  View Basket |  Checkout |  My Account
Chat service by BoldChat

Hardwood Floor Finishes and Coatings - Category: Primers

Primers
Sort by:
Color
Coatings
Clear
Finishes
Non-Slip
Coatings
Primers Calks &
Sealants
Non-Slip
Additives
Thinners Paint
Cleaner
Accelerator
/Hardener
Super-Fleck
Chips
                                   
TS-307 Multi-Purpose Oil Based Primer-Gallon
TS-307 Multi-Purpose Oil Based Primer-Gallon

Gallon
List: $89.95
Our Price: $71.96

5 Gallon
List: $429.95
Our Price: $343.96

 Key Features Recommendations Description
  • Stops mildew staining.
  • Prevents tannin bleeding and pitch stains.
  • May be applied directly to previously painted surfaces.
  • Produces a sound base coat.
  • Works with oil bases and water based paint.
  • Acceptable for interior or exterior use.
INTENDED USE: Commercial and consumer interior and exterior use.

SURFACES: Bare and previously painted surfaces including drywall, wood siding, shakes, trim, concrete, brick, stucco, cement composite siding, and clean metal.

USES:
Walls, ceilings, railings, millwork, fences, and trim.

THINNER: TS-101 Leveling Thinner.

APPLICATION: Spray, brush or roll.
Multi-Purpose Oil Base Primer is a good way to begin your project when knot discoloration, pitch or tannin bleeding is a concern. This oil-alkyd formulation gives this product excellent penetration over all wood surfaces. It has exceptional hide characteristics locking out stains permanently. It resists mildew growth for extra protection and longevity. Use it to establish a sealed uniform surface for the application of flat, satin, semi-gloss or gloss finishes. Acceptable for use with either oil based or waterborne paints. Color: White. Coverage is approximately 300 square feet per gallon.

TS-780 Mono-Epoxy Primer-Gallon
TS-780 Mono-Epoxy Primer-Gallon

Gallon
List: $120.95
Our Price: $96.76

5 Gallon
List: $584.95
Our Price: $467.96

 Key Features Recommendations Description
  • Easy to use no mix formula.
  • Commercial industrial quality product.
  • Will not lift to hot tires.
  • Will fill and seal small cracks and voids.
  • Good chemical resistance.
  • Withstands harsh weather climates.
  • A barrier coat that prevents water intrusion.
  • Resists cracking, peeling and chipping.
  • Low odor.
Mono-Epoxy Primer makes priming with epoxy easier than ever with its unique no-mix formula. A new generation epoxy-ester primer that utilizes oxygen curing rather than two-component catalyst-curing making it easier to use. Its exceptionally high level of performance and ease of application combine to make it a compelling choice. Provides a sound base for the application of most any floor paint or coating product. Grinding or blasting not typically required on concrete with the use of TS-695 Etching Cleaner or Muriatic acid. Covers up to 300 square feet per gallon. See Product Data Sheet for further details. Mono-Epoxy Primer makes priming with epoxy easier than ever with its unique no-mix formula. A new generation epoxy-ester primer that utilizes oxygen curing rather than two-component catalyst-curing making it easier to use. Its exceptionally high level of performance and ease of application combine to make it a compelling choice. Provides a sound base for the application of most any floor paint or coating product. Grinding or blasting not typically required on concrete with the use of TS-695 Etching Cleaner or Muriatic acid. Covers up to 300 square feet per gallon. See Product Data Sheet for further details.

TS-6390 Ever-Last Epoxy Primer - 1/2 Gallon
TS-6390 Ever-Last Epoxy Primer - 1/2 Gallon

1 Gallon A&B
List: $139.95
Our Price: $111.96

2 Gallon A&B
List: $269.95
Our Price: $215.96

 Key Features Recommendations Description
  • Suitable for commercial-industrial or residential use.
  • Provides a sound base coat.
  • High adhesion.
  • Excellent hardness.
  • Dries fast.
  • Produces an exceptionally durable finish.
  • Excellent resistance to corrosive chemicals, spilled fuel, and battery acid.
  • A waterproof barrier.
  • Resists cracking, peeling and chipping.
  • 4-6 hour pot life once mixed.
INTENDED USE: A super-duty epoxy floor primer coating intended for industrial floor coatings applications. Suitable for commercial and residential use.

SURFACES: Concrete, tile, masonry, fiberglass, metal and wood.

USES: Concrete floors, walkways, ramps, commercial kitchens, manufacturing areas, industrial areas, food service areas, bathrooms and laundry rooms. Acceptable for use with all epoxy garage floor coating products.

THINNER: TS-605 Thinner.

APPLICATION: Apply by roller-coat or spray.
Ever-Last Epoxy Primer is a two component polyamide epoxy floor coating primer intended for heavy-duty applications. It is your best choice for use on concrete floors because it will not react negatively with alkalis within the concrete matrix. Use it wherever there is high volume motorized traffic or where corrosive chemicals, spilled fuel, oil or standing water is regularly present. Offers excellent adhesion and hardness with superior chemical resistance. Will not pick up to hot tires. Grinding or blasting not typically required on concrete with the use of TS-695 Etching Cleaner or Muriatic acid. Covers up to 300 square feet per gallon.

ProductCart

Superfloor Coatings - 1999 Elizabeth Street, North Brunswick, NJ 08902, US