Floor Paint and Coatings
Home |  MSDS  |  Product Data Sheets |  Application Instructions |  Best Sellers |  New Arrivals |  Specials |  View Basket |  Checkout |  My Account

Hardwood Floor Finishes and Coatings - Category: Calks and Sealants

Calks and Sealants Our caulks and sealants are acceptable for most any application including concrete, wood, metal and synthetic floor paint and coating materials. They are acceptable for use with Urethane, Epoxy, Acrylic, Alkyd and Epoxy Floor Finish, and durable enough for high traffic industrial and commercial use. We offer outstanding technical advice and customer service so if you have a question about any of our products don't hesitate to call us toll free at 1-877-568-2168 M-F 8AM-5PM Pacific Time.
Sort by:
Color
Coatings
Clear
Finishes
Non-Slip
Coatings
Primers Calks &
Sealants
Non-Slip
Additives
Thinners Paint
Stripper
Accelerator
/Hardener
Super-Fleck
Chips
                                   
TS-670 EMCU Moisture Cure Urethane Sealer
TS-670 EMCU Moisture Cure Urethane Sealer

Single Tube
List: $22.95
Our Price: $18.36

Case of 24
List: $504.95
Our Price: $403.96

 Key Features Recommendations Description
  • Highly versatile sealant acceptable for most any use.
  • Uses moisture present in the air to achieve the cure.
  • Acceptable for water submersion duty.
  • Remains flexible enough long term to move with the substrate.
  • Acceptable for water submersion duty.
  • Easy to use, fits in any thrust style calking gun.


INTENDED USE:
A heavy-duty moisture-cure urethane calk-sealant. Interior / exterior use.

SURFACES:
Concrete, tile, masonry, wood, plaster, fiberglass, synthetic materials and all metals.

USES:
Fill, repair and seal cracks, seams, voids and expansion joints in floor, wall, roof and similar structures typically in preparation for a paint or coating product.

PRIMER:
None typically required.

Application:
Apply to clean dry surfaces with a calking gun.
TS-670 EMCU Moisture Cure Urethane Sealer is used for filling, repairing and sealing cracks, seams, voids and expansion joints in floor, wall, roof and similar structures typically in preparation for the application of a paint or coating product. A superior grade elastomeric polyurethane sealant that utilizes moisture present in air to achieve the cure eliminating the need for mixing resin with catalyst. This high performance sealant is easy to use, versatile and highly durable. The high solid content resin (96% solid) will not sag when applied to vertical and overhead surfaces and has a low shrink ratio. It will bond to most any substrate including concrete, tile, masonry, plaster, aluminum, steel, vinyl and wood. It is acceptable in constant water immersion duty when over-coated with ptotective waterproof paint. The tube fits easily in any standard thrust type calking gun. It is low odor and low VOC. Used on floors, driveways, walkways, ramps, bridges, masonry, walls, pools, roofs and similar structures. Recommended for expansion joints, panel walls, precast units, aluminum and wood window frames, roofing, facia, parapets, vinyl siding, water-wells, and manholes, spillways, storm drains, and other uses. The product is supplied in individual tubes for use with typical caulking guns with a suitable thrust ratio. It is available in single tubes or cases of 24 pieces per package (300ml per cartridge is 10.1 fl oz). Color is Limestone (light gray). Complies to ASTM C920 Type S, Federal specification TT-S-00230C Type II, Corp of Engineers CRD-C-541, Type II, Class A.

TS-671 Power Patch
TS-671 Power Patch

5LB
List: $15.95
Our Price: $12.76
10LB
List: $26.95
Our Price: $21.56

50LB
List: $119.95
Our Price: $95.96

 Key Features Recommendations Description
  • Easy to use just mix with water.
  • Pourable once mixed.
  • Fast setting. Becomes harder than concrete in less than one hour.
  • Acceptable for use on concrete, masonry and tile.
  • Expands into place improving adhesion.
  • Paintable, utilizing oil and water-based paints.
  • Economical to use.


INTENDED USE:
A heavy-duty hydraulic type cement used to patch, repair and fill voids, cracks, joints and breaks.

SURFACES:
Concrete, tile, terrazzo, masonry and plaster.

USES:
Fill, repair and seal cracks, seams, voids and expansion joints in floors, walls, roofs and similar structures. Widely used in preparation for a floor paint or coating product. Interior / exterior use. May be used in swimming pools and water features when used in combination with a waterproof protective coating.

INSTRUCTIONS:
Only apply to clean thoroughly surfaces. Mix with enough water to get the desired consistency. Once mixed just pour it into place, troweling as necessary to achieve a smooth finish. One pound of Power-Patch yields 18.75 cubic inches, ninety-two pounds of Power-Patch yields 1 cubic foot.
Power-Patch (TS-671) ) is an expanding, fast setting, pourable hydraulic type cement used to patch repair and fill voids, breaks, cracks and joints in concrete, masonry, tile, terrazzo cement. It is acceptable for use on floors, swimming pools, stairs, ramps, landings, walls or most any cementious surface. It saves repair dollars because it ensures permanent results making it perfect for use in commercial, industrial and residential applications. When mixed with water to a pourable consistency, it flows and seeps into place filling voids and cracks thoroughly. It takes and initial set within 15 minutes. It dries quickly, harder than concrete in less than one hour. Once fully cured it has more than twice the strength of fully cured conventional concrete. Within one hour it develops a compression strength of 4500 LBS. per square inch. Its adhesion is due to expansion, and when fully set it grips metal to concrete permanently. Color is light gray. Available in 5LB, 10LB and 50LB packages.

ProductCart

Superfloor Coatings - 1999 Elizabeth Street, North Brunswick, NJ 08902, US

Chat service by BoldChat