Floor Paint and Coatings
Home |  MSDS  |  Product Data Sheets |  Application Instructions |  Best Sellers |  New Arrivals |  Specials |  View Basket |  Checkout |  My Account
Chat service by BoldChat

Sports Courts - Category: Clears

Clears
Sort by:
Concrete Asphalt Wood Clears Aggregate Added Products Primers Cleaners
Non-Slip
Additives
Cleaners Hardeners Calks &
Sealants
Thinners
TS-66 Supreme Urethane-Gallon
TS-66 Supreme Urethane-Gallon

Half Gallon A&B
List: $115.95
Our Price: $92.76

Gallon A&B
List: $215.95
Our Price: $172.76

 Key Features Recommendations Description
  • Finish coating for floors. Interior / exterior use.
  • Features lower VOC and higher solid content for increased build.
  • Provides unequaled resistance to corrosive chemicals, spilled fuel, and battery acid.
  • Waterproof.
  • Excellent hardness.
  • High adhesion.
  • Outstanding UV resistance.
  • Colorfast gloss retentive.
  • Withstands heat to 500F.
  • Self levels.
  • 4-6 hour pot life once mixed.
  • 20 year guaranty.
INTENDED USE: A super-duty finish coating for industrial, manufacturing and residential interior / exterior applications.

SURFACES: Concrete, tile, masonry, plaster, wood, fiberglass, synthetic materials and all metals.

USES: Commercial use, hangars, bathrooms, commercial kitchens, parking garages, drive through areas, concrete sealer and garage floor paint. Approved for food service.

PRIMER: Concrete TS-6390, glazed tile linoleum & fiberglass TS-664, wood, none required.

THINNER: TS-605 Thinner.

APPLICATION: Brush, roll or spray.
TS-66 Concrete Floor Application Instructions
Supreme Urethane is our most durable product. A government spec two-component aliphatic polyurethane finish coating that performs according to specification number MIL-P-85285, so you know you are getting the best. This recent reformulation of TS-2 Hard-Shell Urethane offers lower VOC, twice the solid content resulting in higher build and increased long-term durability. Offers unequaled performance in a wide variety of categories including adhesion, hardness, chemical resistance, resistance to high heat, color and gloss retention. Intended for use where heavy traffic, strong chemicals, high heat, spilled fuel, acids, alkalis, solvents, saltwater, high impacts and corrosion are present. Will not pick up to hot tires. Grinding or blasting not typically required with the use of TS-695 Etching Cleaner or Muriatic acid. Covers up to 300 square feet per gallon.

TS-66 Supreme Urethane Clear-Gallon
TS-66 Supreme Urethane Clear-Gallon

Half Gallon A&B
List: 115.95
Our Price: $92.76

Gallon A&B
List: $215.95
Our Price: $172.76

 Key Features Recommendations Description
  • A super-duty floor coating suitable for commercial-industrial or residential use.
  • Features lower VOC and higher solid content for increased build.
  • Provides unequaled resistance to corrosive chemicals, spilled fuel, and battery acid.
  • Waterproof long term.
  • Excellent hardness.
  • Outstanding UV resistance.
  • Colorfast gloss retentive.
  • Withstands heat to 500F.
  • Self levels.
  • 4-6 hour pot life once mixed.
  • 20 year guaranty.
INTENDED USE: A super-duty finish coating for floors. Interior / exterior.

SURFACES: Concrete, tile, masonry, plaster, wood, fiberglass, synthetic materials and all metals.

USES: Commercial use, hangars, bathrooms, commercial kitchens, parking garages, drive through areas, showers, concrete sealer and garage floor paint.

THINNER: TS-605 Thinner.

APPLICATION: Brush, roll or spray.
TS-66 Concrete Floor Application Instructions
Supreme Urethane Clear is a government spec two-component polyurethane finish coating that performs according to specification number MIL-P-85285, so you know you are getting the best. This recent reformulation of TS-2 Hard-Shell Urethane offers lower VOC, twice the solid content resulting in higher build and increased long-term durability. One coat of TS-66 equals two coats of TS-2. Offers unequalled performance in a wide variety of categories including adhesion, hardness, chemical resistance, resistance to high heat, color and gloss retention. Intended for use where heavy traffic, strong chemicals, high heat, spilled fuel, acids, alkalis, solvents, saltwater, high impacts and corrosion are present. Will not pick up to hot tires. Grinding or blasting not typically required with the use of TS-695 Etching Cleaner or Muriatic acid. Covers up to 300 square feet per gallon. Apply one or two coats as needed.

TS-100 Silicone Epoxy Clear-Gallon
TS-100 Silicone Epoxy Clear-Gallon

Quart
List: $49.95
Our Price: $39.96

Half-Gallon
List: $74.95
Our Price: $59.96

Gallon
List: $136.95
Our Price: $109.56

5 Gallon
List: $674.95
Our Price: $539.96

 Key Features Recommendations Description
  • Easy to use no-mix formula.
  • Low VOC low odor product.
  • Produces a hard yet flexible finish.
  • Good chemical resistance.
  • Waterproof finish.
  • Excellent hardness.
  • High adhesion.
  • Provides unequaled, UV resistance, clarity and gloss retention.
  • Withstands heat to 400F.
  • Resists cracking, peeling and chipping.
  • Self-leveling finish.
  • 20 year guaranty.
INTENDED USE: Commercial and residential interior / exterior.

SURFACES: Concrete, tile, masonry, plaster, wood, fiberglass, synthetic materials and all metals.

USES: Floors, bathrooms, laundry rooms, basements, showers, commercial kitchens, epoxy garage floors and most concrete floor paint applications.

THINNER: TS-101 Thinner.

PRIMER: Self-priming in two or more coats on most surfaces.

APPLICATION: Brush, roll or spray.
TS-100 Concrete Floor Application Instructions
Silicone Epoxy Clear is a unique resin blend that produces extraordinary results in a wide variety of applications. Silicone combined with epoxy produces a finish that is both hard and flexible at the same time. Offers unequalled performance where grease, oil, grime and water is regularly present. Offers a high level of adhesion with good flexibility, hardness, chemical resistance and resistance to high heat. Offers outstanding gloss retention. Intended for use where heavy traffic, high heat, acids, alkalis, solvents, saltwater, high impacts and corrosion are present. Grinding or blasting not typically required on concrete with the use of TS-695 Etching Cleaner or Muriatic acid. Covers up to 400 square feet per gallon. Apply two or more coats for best results.

TS-100 Silicone Epoxy-Gallon
TS-100 Silicone Epoxy-Gallon

Quart
List: $49.95
Our Price: $39.96

Half-Gallon
List: $74.95
Our Price: $59.96

Gallon
List: $136.95
Our Price: $109.56

5 Gallon
List: $674.95
Our Price: $539.96

 Key Features Recommendations Description
  • Suitable for commercial-industrial or residential use.
  • Low VOC low odor product.
  • Produces a hard yet flexible finish.
  • Provides a high level of chemical resistance.
  • Waterproof long-term.
  • Povides unequaled UV resistance, colorfastness and gloss retention.
  • Withstands heat to 400F.
  • Resists cracking, peeling and chipping.
  • Self-leveling finish.
  • 20 year guaranty.
INTENDED USE: Finish coating for floors. Interior / exterior use.

SURFACES: Concrete, tile, masonry, plaster, wood, fiberglass, synthetic materials and all metals.

USES: Showers, kitchens, bathrooms, laundry rooms, basements, epoxy garage floors and most concrete floor paint applications. Approved for food service.

PRIMER: Concrete; self priming in to or moe coats. wood, linoleum & fiberglass TS-664 Etching Primer.

THINNER: TS-101 Thinner.

APPLICATION: Brush, roll or spray.
TS-100 Concrete Floor Application Instructions
Silicone Epoxy is a unique resin blend that produces extraordinary results in a wide variety of applications. Silicone combined with epoxy produces a finish that is both hard and flexible at the same time. The self leveling finish is remarkably glossy and smooth. Offers unequalled performance where standing water, grease, oil or intense UV are regularly present. Offers a high level of adhesion with good flexibility, hardness, chemical resistance and resistance to high heat. Offers remarkable color and gloss retention. Grinding or blasting not typically required on concrete with the use of TS-695 Etching Cleaner or Muriatic acid. Covers up to 400 square feet per gallon. Apply two or more coats for best results. Note: Product formerly named 1-Part Epoxy.

TS-200 Mono-Epoxy-Gallon
TS-200 Mono-Epoxy-Gallon

Gallon
List: $136.95
Our Price: $109.56

5 Gallon
List: $674.95
Our Price: $539.96

 Key Features Recommendations Description
  • Easy to use no mix formula.
  • Commercial industrial quality product.
  • Will not lift to hot tires.
  • Long term waterproof finish.
  • Good chemical resistance.
  • Self-priming on concrete and porous tile in two or more coats.
  • Resists fading and weathering.
  • Resists cracking, peeling and chipping.
  • Self levels.
  • Low odor.
  • Nontoxic finish.
  • 20 year guaranty.
INTENDED USE: Commercial, industrial, manufacturing and residential interior / exterior. Epoxy floor paint.

SURFACES: Concrete, tile, masonry, fiberglass and metal.

USES: Commercial use, garage floors, basements, retail spaces, kitchens, laundry rooms, patios, porches, docks, ramps, walkways. Meets most concrete floor coatings requirements.

THINNER: TS-101 Leveling Thinner.

APPLICATION: Brush, roll or spray.

TS-200 Application Instructions
Mono-Epoxy rewrites the book on epoxy itself. A new generation alkyd epoxy-ester resin blend that eliminates the need for mixing multiple components making it easier to use. It can be used in hot and cold climates (-40F 350F). Has a 10 year guaranty in swimming pools (see it at www.ligeguardpaint.com), which is a testimony to its durability. Its exceptionally high level of performance and ease of application combine to make it a compelling choice. Self-priming on porous materials, use recommended primer on non-porous materials. Grinding or blasting not typically required with the use of TS-695 Etching Cleaner or Muriatic acid. Covers up to 300 square feet per gallon. A minium of two coats is required.

TS-200 Mono-Epoxy Clear-Gallon
TS-200 Mono-Epoxy Clear-Gallon

Gallon
List: $136.95
Our Price: $109.56

5 Gallon
List: $674.95
Our Price: $539.96

 Key Features Recommendations Description
  • Easy to use no mix formula.
  • Commercial industrial quality product.
  • Will not lift to hot tires.
  • Water resistant finish.
  • Excellent chemical resistance.
  • Self-priming on most surfaces.
  • Resists fading and weathering.
  • Resists cracking, peeling and chipping.
  • Self leveling finish.
  • Nontoxic when dry.
  • 20 year guaranty.
INTENDED USE: Commercial, industrial, manufacturing and residential interior / exterior. Epoxy floor paint.

SURFACES: Concrete, tile, masonry, fiberglass and metal.

USES: Commercial use, garage floors, basements, retail spaces, kitchens, laundry rooms, patios, porches, docks, ramps, walkways. Meets most concrete floor coatings requirements.

THINNER: TS-101 Leveling Thinner.

APPLICATION: Brush, roll or spray.

TS-200 Application Instructions
Mono-Epoxy Clear rewrites the book on epoxy itself. A new generation epoxy-ester floor finish that eliminates the need for mixing multiple components together. It utilizes oxygen curing rather than two-component catalyst-curing making it easier to use. Acrylic has been added to improve long term durability and clarity. It can be used in hot and cold climates (-40F 350F). Its exceptionally high level of performance and ease of application combine to make it a compelling choice. Self-priming on porous materials, scuff and etch glazed surfaces. Grinding or blasting not typically required on concrete with the use of TS-695 Etching Cleaner or Muriatic acid. Covers up to 300 square feet per gallon. Two coats required.

ProductCart

Superfloor Coatings - 1999 Elizabeth Street, North Brunswick, NJ 08902, US