- Easy to use just mix with water.
- Pourable once mixed.
- Fast setting. Becomes harder than concrete in less than one hour.
- Acceptable for use on concrete, masonry and tile.
- Expands into place improving adhesion.
- Paintable, utilizing oil and water-based paints.
- Economical to use.
A heavy-duty hydraulic type cement used to patch, repair and fill voids, cracks, joints and breaks.
Concrete, tile, terrazzo, masonry and plaster.
Fill, repair and seal cracks, seams, voids and expansion joints in floors, walls, roofs and similar structures. Widely used in preparation for a floor paint or coating product. Interior / exterior use. May be used in swimming pools and water features when used in combination with a waterproof protective coating.
Only apply to clean thoroughly surfaces. Mix with enough water to get the desired consistency. Once mixed just pour it into place, troweling as necessary to achieve a smooth finish. One pound of Power-Patch yields 18.75 cubic inches, ninety-two pounds of Power-Patch yields 1 cubic foot.
|Power-Patch (TS-671) ) is an expanding, fast setting, pourable hydraulic type cement used to patch repair and fill voids, breaks, cracks and joints in concrete, masonry, tile, terrazzo cement. It is acceptable for use on floors, swimming pools, stairs, ramps, landings, walls or most any cementious surface. It saves repair dollars because it ensures permanent results making it perfect for use in commercial, industrial and residential applications. When mixed with water to a pourable consistency, it flows and seeps into place filling voids and cracks thoroughly. It takes and initial set within 15 minutes. It dries quickly, harder than concrete in less than one hour. Once fully cured it has more than twice the strength of fully cured conventional concrete. Within one hour it develops a compression strength of 4500 LBS. per square inch. Its adhesion is due to expansion, and when fully set it grips metal to concrete permanently. Color is light gray. Available in 5LB, 10LB and 50LB packages.