|
TS-2 Hard-Shell Urethane-Gallon
|
Half Gallon A&B
List: $99.95
Our Price: $79.96
Gallon A&B
List: $186.95
Our Price: $149.56
|
Key Features |
Recommendations |
Description |
- Government spec product suitable for commercial-industrial or residential use.
- Unequaled resistance to corrosive chemicals, spilled fuel, and battery acid.
- Waterproof long term.
- Excellent hardness.
- High adhesion.
- Outstanding UV resistance.
- Colorfast, gloss retentive.
- Withstands heat to 500F.
- Resists cracking, peeling and chipping.
- Self levels.
- 4-6 hour pot life once mixed.
- 20 year guaranty.
|
INTENDED USE: A super-duty urethane finish coating for floors. Interior / exterior use.
SURFACES: Concrete, tile, masonry, wood, plaster fiberglass, synthetic materials and all metals.
USES: Commercial industrial use, hangars, commercial kitchens, bathrooms, showers, parking garages, concrete sealer and garage floor coatings. Approved for food service.
PRIMER: Concrete TS-6390, glazed tile linoleum & fiberglass TS-664, wood, none required.
THINNER: TS-620.
APPLICATION: Brush, roll or spray.
|
Hard-Shell Urethane is a government spec two-component aliphatic polyurethane finish coating that performs according to specification number MIL-P-85285, so you know you are getting the best. Offers unequalled performance in a wide variety of categories including adhesion, hardness, chemical resistance, resistance to high heat, color and gloss retention. Intended for use where heavy traffic, strong chemicals, high heat, spilled fuel, acids, alkalis, solvents, saltwater, high impacts and corrosion are present. Will not pick up to hot tires. Grinding or blasting not typically required with the use of TS-695 Etching Cleaner or Muriatic acid. Covers up to 400 square feet per gallon. Two coats typically required. |
|
|
|
|
TS-66 Supreme Urethane-Gallon
|
Half Gallon A&B
List: $115.95
Our Price: $92.76
Gallon A&B
List: $215.95
Our Price: $172.76
|
Key Features |
Recommendations |
Description |
- Finish coating for floors. Interior / exterior use.
- Features lower VOC and higher solid content for increased build.
- Provides unequaled resistance to corrosive chemicals, spilled fuel, and battery acid.
- Waterproof.
- Excellent hardness.
- High adhesion.
- Outstanding UV resistance.
- Colorfast gloss retentive.
- Withstands heat to 500F.
- Self levels.
- 4-6 hour pot life once mixed.
- 20 year guaranty.
|
INTENDED USE: A super-duty finish coating for industrial, manufacturing and residential interior / exterior applications.
SURFACES: Concrete, tile, masonry, plaster, wood, fiberglass, synthetic materials and all metals.
USES: Commercial use, hangars, bathrooms, commercial kitchens, parking garages, drive through areas, concrete sealer and garage floor paint. Approved for food service.
PRIMER: Concrete TS-6390, glazed tile linoleum & fiberglass TS-664, wood, none required.
THINNER: TS-605 Thinner.
APPLICATION: Brush, roll or spray.
TS-66 Concrete Floor Application Instructions |
Supreme Urethane is our most durable product. A government spec two-component aliphatic polyurethane finish coating that performs according to specification number MIL-P-85285, so you know you are getting the best. This recent reformulation of TS-2 Hard-Shell Urethane offers lower VOC, twice the solid content resulting in higher build and increased long-term durability. Offers unequaled performance in a wide variety of categories including adhesion, hardness, chemical resistance, resistance to high heat, color and gloss retention. Intended for use where heavy traffic, strong chemicals, high heat, spilled fuel, acids, alkalis, solvents, saltwater, high impacts and corrosion are present. Will not pick up to hot tires. Grinding or blasting not typically required with the use of TS-695 Etching Cleaner or Muriatic acid. Covers up to 300 square feet per gallon. |
|
|
|
|
TS-100 Silicone Epoxy-Gallon
|
Quart
List: $49.95
Our Price: $39.96
Half-Gallon
List: $74.95
Our Price: $59.96
Gallon
List: $136.95
Our Price: $109.56
5 Gallon
List: $674.95
Our Price: $539.96
|
Key Features |
Recommendations |
Description |
- Suitable for commercial-industrial or residential use.
- Low VOC low odor product.
- Produces a hard yet flexible finish.
- Provides a high level of chemical resistance.
- Waterproof long-term.
- Povides unequaled UV resistance, colorfastness and gloss retention.
- Withstands heat to 400F.
- Resists cracking, peeling and chipping.
- Self-leveling finish.
- 20 year guaranty.
|
INTENDED USE: Finish coating for floors. Interior / exterior use.
SURFACES: Concrete, tile, masonry, plaster, wood, fiberglass, synthetic materials and all metals.
USES: Showers, kitchens, bathrooms, laundry rooms, basements, epoxy garage floors and most concrete floor paint applications. Approved for food service.
PRIMER: Concrete; self priming in to or moe coats. wood, linoleum & fiberglass TS-664 Etching Primer.
THINNER: TS-101 Thinner.
APPLICATION: Brush, roll or spray.
TS-100 Concrete Floor Application Instructions
|
Silicone Epoxy is a unique resin blend that produces extraordinary results in a wide variety of applications. Silicone combined with epoxy produces a finish that is both hard and flexible at the same time. The self leveling finish is remarkably glossy and smooth. Offers unequalled performance where standing water, grease, oil or intense UV are regularly present. Offers a high level of adhesion with good flexibility, hardness, chemical resistance and resistance to high heat. Offers remarkable color and gloss retention. Grinding or blasting not typically required on concrete with the use of TS-695 Etching Cleaner or Muriatic acid. Covers up to 400 square feet per gallon. Apply two or more coats for best results. Note: Product formerly named 1-Part Epoxy. |
|
|
|
|
TS-200 Mono-Epoxy-Gallon
|
Gallon
List: $136.95
Our Price: $109.56
5 Gallon
List: $674.95
Our Price: $539.96
|
Key Features |
Recommendations |
Description |
- Easy to use no mix formula.
- Commercial industrial quality product.
- Will not lift to hot tires.
- Long term waterproof finish.
- Good chemical resistance.
- Self-priming on concrete and porous tile in two or more coats.
- Resists fading and weathering.
- Resists cracking, peeling and chipping.
- Self levels.
- Low odor.
- Nontoxic finish.
- 20 year guaranty.
|
INTENDED USE: Commercial, industrial, manufacturing and residential interior / exterior. Epoxy floor paint.
SURFACES: Concrete, tile, masonry, fiberglass and metal.
USES: Commercial use, garage floors, basements, retail spaces, kitchens, laundry rooms, patios, porches, docks, ramps, walkways. Meets most concrete floor coatings requirements.
THINNER: TS-101 Leveling Thinner.
APPLICATION: Brush, roll or spray.
TS-200 Application Instructions
|
Mono-Epoxy rewrites the book on epoxy itself. A new generation alkyd epoxy-ester resin blend that eliminates the need for mixing multiple components making it easier to use. It can be used in hot and cold climates (-40F – 350F). Has a 10 year guaranty in swimming pools (see it at www.ligeguardpaint.com), which is a testimony to its durability. Its exceptionally high level of performance and ease of application combine to make it a compelling choice. Self-priming on porous materials, use recommended primer on non-porous materials. Grinding or blasting not typically required with the use of TS-695 Etching Cleaner or Muriatic acid. Covers up to 300 square feet per gallon. A minium of two coats is required. |
|
|
|
|
