Floor Paint and Coatings
Home |  MSDS  |  Product Data Sheets |  Application Instructions |  Best Sellers |  New Arrivals |  Specials |  View Basket |  Checkout |  My Account
Chat service by BoldChat

Sports Courts - Category: Concrete

Concrete
Sort by:
Concrete Asphalt Wood Clears Aggregate Added Products Primers Cleaners
Non-Slip
Additives
Strippers Hardeners Calks &
Sealants
Thinners
TS-66 Supreme Urethane-Gallon
TS-66 Supreme Urethane-Gallon

Half Gallon A&B
List: $115.95
Our Price: $92.76

Gallon A&B
List: $215.95
Our Price: $172.76

 Key Features Recommendations Description
  • Finish coating for floors. Interior / exterior use.
  • Features lower VOC and higher solid content for increased build.
  • Provides unequaled resistance to corrosive chemicals, spilled fuel, and battery acid.
  • Waterproof.
  • Excellent hardness.
  • High adhesion.
  • Outstanding UV resistance.
  • Colorfast gloss retentive.
  • Withstands heat to 500F.
  • Self levels.
  • 4-6 hour pot life once mixed.
  • 20 year guaranty.
INTENDED USE: A super-duty finish coating for industrial, manufacturing and residential interior / exterior applications.

SURFACES: Concrete, tile, masonry, plaster, wood, fiberglass, synthetic materials and all metals.

USES: Commercial use, hangars, bathrooms, commercial kitchens, parking garages, drive through areas, concrete sealer and garage floor paint. Approved for food service.

PRIMER: Concrete TS-6390, glazed tile linoleum & fiberglass TS-664, wood, none required.

THINNER: TS-605 Thinner.

APPLICATION: Brush, roll or spray.
TS-66 Concrete Floor Application Instructions
Supreme Urethane is our most durable product. A government spec two-component aliphatic polyurethane finish coating that performs according to specification number MIL-P-85285, so you know you are getting the best. This recent reformulation of TS-2 Hard-Shell Urethane offers lower VOC, twice the solid content resulting in higher build and increased long-term durability. Offers unequaled performance in a wide variety of categories including adhesion, hardness, chemical resistance, resistance to high heat, color and gloss retention. Intended for use where heavy traffic, strong chemicals, high heat, spilled fuel, acids, alkalis, solvents, saltwater, high impacts and corrosion are present. Will not pick up to hot tires. Grinding or blasting not typically required with the use of TS-695 Etching Cleaner or Muriatic acid. Covers up to 300 square feet per gallon.

TS-107 Court-Coat
TS-107 Court-Coat

Gallon
List: $76.95
Our Price: $61.56

5 Gallon
List: $374.95
Our Price: $299.96

 Key Features Recommendations Description
  • An acrylic base fortified with epoxy for higher durability.
  • Choose from one of three optional non-slip additives.
  • Acceptable for use on a wide variety of surfaces.
  • Utilizes breathable technology reducing the likelihood of blistering or peeling.
  • No-mix formula makes it easy to apply.
INTENDED USE: Semi-professional and amateur athletic court finish coating.

SURFACES: Concrete, wood and asphalt.

USES: Basketball, tennis, racket ball, volleyball and multisport courts. Also used for line striping in warehouses, walkways and on curbs.

THINNER: Water.

APPLICATION: Brush, roll or spray. Not for use over uncured wood, soft tar or unstable surfaces.
Court-Coat makes creating a durable athletic area a slam-dunk! It is a no-mix acrylic latex fortified with epoxy to improve long term durability and performance. It is acceptable for use on all exterior or interior sports court surfaces including wood, concrete, macadam, all-weather asphalt and bituminous-based composition surfaces. It can be used on most any hard surface where a skid-resistant finish is desired and for pedestrian safety, such as stone, brick, unglazed tile, cement tile, concrete block, slate and primed metal. Choose one of our three optional non-skid additives (TS-630, TS-631, TS-632) to produce the exact texture you are looking for. Low odor, low VOC. Available in 100 colors. One gallon covers 250 square feet. Two coats are required.

TS-905 Aquapoxy Epoxy-Gallon
TS-905 Aquapoxy Epoxy-Gallon

Gallon A&B
List: $219.95
Our Price: $175.96

4 Gallon A&B
List: $869.955
Our Price: $695.96

 Key Features Recommendations Description
  • Use as a one-coat or two-coat system.
  • Eco-friendly Zero VOC product.
  • Long pot life makes it easy to use.
  • Surface tolerant breathable formula.
  • Provides remarkable resistance to corrosive chemicals.
  • High adhesion.
  • Excellent hardness.
  • Good colorfastness and gloss retention.
  • Self-leveling finish.
  • 20 year guaranty.
INTENDED USE: A super-duty concrete coating for floors. Primarily for interior use but may be used outdoors.

SURFACES: Concrete, tile, VCT, masonry, plaster, fiberglass, synthetic materials.

USES: Commercial industrial use, hangars, commercial kitchens, retail, bathrooms, parking garages, concrete sealer and garage floor coatings. Approved for food service.

PRIMER: None required on concrete and tile. Glazed tile, linoleum & fiberglass use TS-664.

THINNER: Water.

APPLICATION: Roll or spray.

NOT RECOMMENDED: For wooden surfaces.
TS-905 Application Instructions
Aquapoxy is a new generation catalyst-cured epoxy floor finish that produces excellent results without harming you or the environment. And it’s tough! Recently chosen by 7-11 Stores (world’s largest retail chain) for use in all new construction. Utilizes breathable resin technology to produce an exceptionally hard, durable, surface tolerant finish. Adhesion, chemical resistance, hardness and long term durability are all impressive! This unique combination of environmental and performance properties make it a favorite with architects and property managers. Acceptable for use where heavy traffic, corrosive chemicals, impacts and abrasions are present. Grinding or blasting not typically required with the use of TS-695 Etching Cleaner or Muriatic acid. Covers 200-250 square feet per gallon. Apply one or two coats as desired. Two coats recommended in H-D and commercial applications.

TS-920 Aquapoxy II -Gallon
TS-920 Aquapoxy II -Gallon

Gallon
List: $149.95
Our Price: $119.96

5 Gallon
List: $739.95
Our Price: $591.96

 Key Features Recommendations Description
  • Use as one-coat or two-coat system.
  • Utalizes nano-technology to produce superior adhesion.
  • Eco-friendly, low VOC, low odor product.
  • No-mix formula makes it easy to use.
  • Surface tolerant breathable finish.
  • Provides good chemical resistance.
  • Self-priming.
  • Excellent hardness & durability.
  • Good colorfastness and gloss retention.
  • Self-leveling finish.
  • 20 year guaranty.
INTENDED USE: A commercial grade finish coating for floors. Interior / exterior use.

SURFACES: Concrete, porous tile, masonry, plaster and synthetic materials.

USES: Commercial, industrial, retail, hangars, commercial kitchens, bathrooms, parking garages, concrete sealer and garage floor coatings. Approved for food service.

PRIMER: Self priming on concrete, masonry and porous tile. Glazed tile, wood & fiberglass TS-664 Etching Primer.

THINNER: Water.

APPLICATION: Brush, roll or spray.
TS-920 Application Instructions
Aquapoxy II is our most technically advanced product. Unique because it includes A resin and B catalyst combined in one container, effectively making it a two-component product in one can. Once applied the molecules cross-link greatly increasing hardness and durability. Utilizes nano-technology producing superior adhesion (micro-ground particles penetrate concrete producing a permanent bond) providing results not commonly associated with water based epoxy finishes. It is low VOC, nontoxic and environmentally friendly. Acceptable for use where there is motorized traffic, chemicals, salt, high impacts and abrasions. It will not lift to hot tires. The finish is breathable making it surface tolerant and easy to apply. Grinding or blasting not typically required with the use of TS-695 Etching Cleaner or muriatic acid. Self priming, may be applied direct to concrete or over any existing coating. 1-COAT COVERAGE: use a ¾ roller cover @ 200 sq ft per gal. 2-COAT COVERAGE: use a 3/8” roller cover @ 300 sq ft per gal. Color is satin, clear is gloss. Apply one coat of color/one coat of clear for a gloss finish.

TS-6433 Ever-Last Polyamide Epoxy-2 Gallon
TS-6433 Ever-Last Polyamide Epoxy-2 Gallon

2 Gallon
List: $242.20
Our Price: $193.76

 Key Features Recommendations Description
  • A government spec formula suitable for commercial-industrial or residential use.
  • Excellent resistance to corrosive chemicals, spilled fuel, and battery acid.
  • Waterproof finish.
  • High adhesion.
  • Excellent hardness.
  • Produces an exceptionally durable finish.
  • 4-6 hour pot life once mixed.
  • 20 year guaranty.
INTENDED USE: A heavy-duty epoxy finish coating for floors. Interior / exterior use.

SURFACES: Concrete, tile, masonry, fiberglass, wood and metal.

USES: Concrete floors, walkways, ramps, commercial kitchens, manufacturing areas, industrial areas, bathrooms and laundry rooms. Excellent for use as an epoxy garage floor coating product. Approved for food service.

PRIMER: Concrete & wood TS-6390, tile linoleum & fiberglass TS-664.

THINNER: TS-605 Thinner.

APPLICATION: Apply by roller-coat or spray.
TS-6433 Floor Application Instructions
Ever-Last Epoxy is a two component polyamide epoxy floor coating intended for heavy-duty commercial and industrial applications. A government spec formula that performs according to specification number MIL-C-22750. Use Ever-Last Epoxy wherever there is high volume motorized traffic, corrosive chemicals, spilled fuel, oil or in extreme weather conditions. Offers excellent performance in a wide variety of categories including adhesion, hardness and chemical resistance. It provides a high level of performance where acids, alkalis, high impacts and abrasions are regularly present. Will not pick up to hot tires, approved for food service applications. Grinding or blasting not typically required with the use of TS-695 Etching Cleaner or Muriatic acid. Covers up to 300 square feet per gallon. Best when two coats are applied.

ProductCart

Superfloor Coatings - 1999 Elizabeth Street, North Brunswick, NJ 08902, US