- Highly versatile sealant acceptable for most any use.
- Uses moisture present in the air to achieve the cure.
- Acceptable for water submersion duty.
- Remains flexible enough long term to move with the substrate.
- Acceptable for water submersion duty.
- Easy to use, fits in any thrust style calking gun.
|
INTENDED USE:
A heavy-duty moisture-cure urethane calk-sealant. Interior / exterior use.
SURFACES:
Concrete, tile, masonry, wood, plaster, fiberglass, synthetic materials and all metals.
USES:
Fill, repair and seal cracks, seams, voids and expansion joints in floor, wall, roof and similar structures typically in preparation for a paint or coating product.
PRIMER:
None typically required.
Application:
Apply to clean dry surfaces with a calking gun. |
TS-670 EMCU Moisture Cure Urethane Sealer is used for filling, repairing and sealing cracks, seams, voids and expansion joints in floor, wall, roof and similar structures typically in preparation for the application of a paint or coating product. A superior grade elastomeric polyurethane sealant that utilizes moisture present in air to achieve the cure eliminating the need for mixing resin with catalyst. This high performance sealant is easy to use, versatile and highly durable. The high solid content resin (96% solid) will not sag when applied to vertical and overhead surfaces and has a low shrink ratio. It will bond to most any substrate including concrete, tile, masonry, plaster, aluminum, steel, vinyl and wood. It is acceptable in constant water immersion duty when over-coated with ptotective waterproof paint. The tube fits easily in any standard thrust type calking gun. It is low odor and low VOC. Used on floors, driveways, walkways, ramps, bridges, masonry, walls, pools, roofs and similar structures. Recommended for expansion joints, panel walls, precast units, aluminum and wood window frames, roofing, facia, parapets, vinyl siding, water-wells, and manholes, spillways, storm drains, and other uses. The product is supplied in individual tubes for use with typical caulking guns with a suitable thrust ratio. It is available in single tubes or cases of 24 pieces per package (300ml per cartridge is 10.1 fl oz). Color is Limestone (light gray). Complies to ASTM C920 Type S, Federal specification TT-S-00230C Type II, Corp of Engineers CRD-C-541, Type II, Class A. |
