It’s an easy-to-apply complete finishing system for hardwood
floors that dries hard and enhances and protects the beauty of all
wood flooring materials in almost any application. It’s also an
excellent choice for use on kitchen cabinets, furniture and trim.
A high-quality modified aromatic urethane which is highly durable,
impact and stain resistant. The solids content in this system is
higher than conventional nitrocellulose lacquers or oil-based
stains, making film build and aesthetic appearance better than
conventional finishing systems. Designed as a high abrasion
resistant clear wood finish for hardwood floors, cabinets, counter
tops and wood trim. Not intended for use as a deck stain or for
submersion service.
Stats:
May be sprayed or applied with a
mohair roller, high quality synthetic bristle brush or lambs wool
applicator. For best results apply between 50 and 85 degrees F.
Apply clear finish by airless spray for cabinets and furniture;
apply by foam applicator or short nap roller brush for floors. Dry
to the touch in 30-45 minutes, tack free in 2 hours, dries hard in
3 hours, time to re-coat 24 hours. Practical coverage is 300-400
square feet per gallon. Available in one gallon or five gallon
containers satin and semi-gloss.
Recommended
preparation:
Refer to Application Instructions
Sheet included with order, label directions and standard industry
application practices. For best results remove existing finishes,
old floor paint, loose scale, wax, oil and contaminates. For best
results sand before application. All wood surfaces must be
thoroughly cleaned and dry (20% or less moisture content) before
application.
Recommended
primers:
None.
Thin &
clean up:
No thinning is required or
recommended. Tools and equipment may be cleaned with warm regular
tap water. It is best to lean- up as soon as is possible as this
material develops rapid water resistance.
MSDS
