Thinners, Solvents, Cleaners

Leveling Thinner (TS-101) is a proprietary blend of solvents that include effective conditioning and drying agents. For best results use only where recommended for use as a thinner. A solvents blend that conditions and improves the viscosity, leveling properties, dry and cure times while enhancing the application of paint and primer where recommended. Acceptable for use as cleaners / solvents / thinners.    .    MSDS

Quart	List $14.95	Our Price     $11.96
Gallon	List $39.95	Our Price     $31.96
5 Gallon	List $189.95	Our Price    $151.96

Quick-Dry Synthetic Thinner  (TS-605) A proprietary formula that speeds the flash time. Use where recommended for best results. It thins, conditions and improves application of Top Secret paint and coatings. Enhances the penetration and leveling qualities of other coatings. Use only where recommended. Use for clean up. Note: For best results use with recommended TOP SECRET products.  A synthetic fast dry thinner that thins and cleans spills and tools. Not recommended for use with TS-100 1-Part Epoxy or TS-4.  Acceptable for use as cleaners / solvents / thinners.    MSDS
 

Quart	List $15.95	Our Price     $12.76
Gallon	List $41.95	Our Price     $33.56
5 Gallon	List $199.95	Our Price    $159.96

Blended Thinner (TS-620) A proprietary solvent blend for use with recommended products. Helps prevent moisture blushing without retarding the dry time of the product. A thinner-Reducer that has been adjusted for electrical resistance value compatible with most electrostatic spraying operations. Also compatible with nitrocellulose lacquers. May be used as a thinning solvent for when a slightly slower evaporating rate is desired. Not recommended for use with TS-4 Urethane Reinforced Alkyd or TS-100 1-Part Epoxy.  Acceptable for use as cleaners / solvents / thinners.    MSDS
 

Quart	List $15.95	Our Price     $13.56
Gallon	List $44.95	Our Price     $35.96

Triple Strength Paint Stripper  (TS-646) A fast acting water-based paint stripper that is very effective. It contains no caustic, acid, or flammable solvent. This product readily removes paint, varnish, lacquer, baked enamel and shellac safely from most surfaces. It can be used on concrete, metal, wood and glass. Out performs typical stripper / cleaners. Intended Use: For removing paint, varnish, lacquer, baked enamel, or shellac from concrete, metal, wood, or glass. Not intended to be used with cleaners, thinners or solvents.              MSDS     Performance Data

Gallon	List $52.95	Our Price     $42.36
5 Gallon	List $254.95	Our Price    $203.96

Etching Cleaner (TS-695) cleans and removes lime, rust and contaminates from concrete, metal fiberglass, aluminum and masonry. It is effective and fast acting. Corrects the pH on concrete and other surfaces promoting adhesion. Use it and watch oil, grease, dirt, exhaust and chemical stains disappear quickly and completely. Also attacks rust, corrosion and oxidation from screw threads, grooves and crevices as well as smooth surfaces.
.
This is an excellent pre-treatment solution to be used on concrete floors prior to application of coatings and sealers by removing unwanted contaminants from the floor and neutralizing lime and by-products on the surface which may seriously impair the coatings’ ability to form a good bond to the concrete. Tested and approved by aluminum manufacturers for use on all aluminum products. Removes easily and safely exhaust and chemical stains, oxides and corrosion from aluminum, zinc and cadmium plate as well as iron and steel.
.
A Phosphoric Acid based Metal & Concrete Pretreatment Solution. Intended Use: Removes cleaners, stains, oxides and corrosion from a wide variety of surfaces. Not intended to be used with thinners or solvents. Available in quart, gallon and five gallon containers.

Note: Recommend TS-104 Seal-It! for areas where moisture, mold, mildew, water intrusion and hydrostatic pressure are present.         MSDS  -   Performance Data

Quart	List $15.95	Our Price     $12.76
Gallon	List $36.95	Our Price     $29.56
5 Gallon	List $174.95	Our Price    $139.95

TSP Cleaner Trisodium Phosphate Cleaner is a non-sudsing powdered compound formulated for heavy-duty cleaning. Used in flooring applications to remove stubborn grease and oil stains from concrete. Preferred by painting and cleaning professionals for removing heavy deposits of grime, smoke, soot, and chalked paint. Kills mildew when mixed with bleach (complete directions on package). Use on walls, woodwork, or floors. Cleans and prepares surfaces for repainting. Also recommended for washing away paint remover sludge. Rinse thoroughly after use because TSP can inhibit the adhesion of paint! Not intended to be used with thinners or solvents. Available in 1 pound and 4 pound boxes. 
 

One Pound Box	List $10.95	Our Price      $9.31
Four Pound Box	List $27.95	Our Price     $23.76

Decelerator  (TS-25, TS-625)  An optional decelerator specifically formulated for use with fast dry top coatings and primers. Use it to extend dry times when temperatures are above 75F or when circumstances require slower flash and dry times. TS-25 Flash Decelerator works especially well with TS-2 Hard-Shell Urethane, TS-4985 Ever-Last EXP, TS-6433 Ever-Last Epoxy and TS-664 Etching Primer. Not recommended for use with TS-4 Urethane Reinforced Alkyd and TS-100 1 Part Epoxy. INSTRUCTIONS: Add not more than 10% by volume. Stir in thoroughly. There is no induction time. Not intended to be used as cleaners   

Quart

List $16.95

Our Price  $13.56